Old wax builds up over time and turns your floors yellow, dull, and scuffed. We strip the old finish all the way down, deep-clean the floor, and apply fresh coats of commercial wax — leaving your floors with a bright, protective shine that looks great and lasts.
A proper strip and wax is a multi-step process. Here's everything we do to bring your floors back to life.
Floor stripping and waxing looks simple but it's easy to get wrong — streaky finish, uneven shine, or floors that look worse after the job. We use the right products, the right equipment, and the right process every time.
Some companies cut corners and apply new wax over old buildup. That creates a yellow, uneven finish that gets worse over time. We strip the floor completely first — every time — so the new finish adheres properly and looks great.
Stripping and waxing takes time and the floor needs to be clear while we work. We schedule all floor jobs for evenings or weekends so your business is never interrupted. Floors are dry and ready when you open.
A proper wax finish creates a protective barrier that dirt sits on top of — instead of getting ground into the floor. That means your regular cleaning is faster and more effective, and the floor stays looking better longer.
Strip and wax once, then we handle regular buffing and recoating to maintain the finish. One vendor manages your entire floor care program — no juggling different companies for different services.
Common questions about hard floor care for commercial properties in Maricopa County.
Most commercial floors need a full strip and recoat once or twice a year. In between, regular buffing and spot recoating keeps the finish looking fresh. High-traffic floors in retail stores, schools, or hospitals may need full stripping more frequently. We'll assess your floors and recommend the right schedule.
Stripping removes all old wax and finish — it's the most intensive process and the starting point for a proper floor restoration. Waxing applies fresh coats of floor finish to protect the surface and create shine. Buffing uses a high-speed machine to polish the existing wax layer, bringing back the shine without applying new coats. All three are part of a complete floor care program.
We work on VCT (vinyl composition tile), standard vinyl, linoleum, sheet vinyl, and concrete with a floor finish. We do not strip and wax hardwood, natural stone, ceramic tile, or polished concrete — those surfaces require different care methods. If you're not sure what type of floor you have, just describe it to us and we'll advise you.
It depends on the size of the area. A typical 2,000–3,000 sq ft floor takes one overnight shift. Larger areas may take two nights. We'll give you an accurate time estimate with your quote so you can plan accordingly. Floors are fully dry and ready for foot traffic within a few hours of finishing.
Almost certainly yes. Yellowing and dullness is almost always caused by old wax buildup, dirt trapped in the finish, or oxidized finish layers. A full strip and recoat removes all of that and gives you a fresh, bright starting point. Most clients are genuinely surprised by how different their floors look after a proper strip and wax.
We move light furniture and items that can be safely relocated. Heavy equipment, built-in fixtures, and items that require disconnecting wiring or plumbing are the client's responsibility to move prior to our arrival. We'll let you know exactly what to have cleared before we come so there are no surprises.
Tell us about your floors and we'll send you a custom quote within 24 hours. No pressure, no obligation.